The Complete Guide To Craftsman Cmcd701c2: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Craftsman CMCD701C2 Information

The Craftsman CMCD701C2 is a 20-volt Max cordless drill/driver kit that features a high-performance motor, 2-speed gearbox, keyless chuck, and LED light. It is a versatile tool that can be used for a variety of applications, including drilling, driving screws, and fastening.

Image of Craftsman CMCD701C2 cordless drill

Specifications

• Motor: 320 unit watts out
• Speeds: 0-500/0-1,800 RPM
• Chuck: 1/2-inch keyless
• Battery: 20-volt Max 1.3Ah lithium ion
• Charger: 20-volt Max lithium ion
• Weight: 5.00 pounds

Features

• High-performance motor provides power for a variety of applications
• 2-speed gearbox for precise control
• Keyless chuck for quick and easy bit changes
• LED light for improved visibility in dark work areas
• Lightweight and compact design for easy portability

What's in the box

• Craftsman CMCD701C2 drill/driver
• 2 x 20-volt Max 1.3Ah lithium ion batteries
• 20-volt Max lithium ion charger
• Belt clip
• Instruction manual

The Craftsman CMCD701C2 is a great choice for homeowners and DIYers who need a versatile and powerful cordless drill/driver. It is well-made and easy to use, and it comes with a variety of features that make it a great value for the price.

Pros

• Powerful motor
• 2-speed gearbox
• Keyless chuck
• LED light
• Lightweight and compact

Cons

• Battery life could be better
• No case included

Overall, the Craftsman CMCD701C2 is a great choice for homeowners and DIYers who need a versatile and powerful cordless drill/driver. It is well-made and easy to use, and it comes with a variety of features that make it a great value for the price.

Craftsman CMCD701C2 Compare with Similar Item

a table comparing the Craftsman CMCD701C2 with a similar item, the Amazon Brand - Denali by SKIL 20V Drill Driver Kit:

Feature	Craftsman CMCD701C2	Amazon Brand - Denali by SKIL 20V Drill Driver Kit
Voltage	20V	20V
Max torque	575 in-lbs	540 in-lbs
Chuck size	1/2"	1/2"
Speed range	0-550 RPM	0-550 RPM
Max impact rate	25,000 BPM	22,500 BPM
Battery life	Up to 180 holes in 2x4s	Up to 160 holes in 2x4s
Weight	3.5 lbs	3.7 lbs
Price	$69.99	$59.99

As you can see, the two drills are very similar in terms of their specifications. The Craftsman CMCD701C2 has a slightly higher max torque, but the Amazon Brand - Denali by SKIL 20V Drill Driver Kit has a longer battery life. The Craftsman CMCD701C2 is also slightly lighter.

Ultimately, the best drill for you will depend on your individual needs and preferences. If you need a drill with the highest possible max torque, then the Craftsman CMCD701C2 is a good choice. If you need a drill with the longest battery life, then the Amazon Brand - Denali by SKIL 20V Drill Driver Kit is a good choice. If you're looking for a lightweight drill, then either drill would be a good option.

Here is a summary of the pros and cons of each drill:

Craftsman CMCD701C2

Pros:

• High max torque
• Lightweight
• Durable

Cons:

• Battery life is not as long as some other drills

Amazon Brand - Denali by SKIL 20V Drill Driver Kit

Pros:

• Long battery life
• Affordable

Cons:

• Max torque is not as high as some other drills

I hope this helps!

Craftsman CMCD701C2 Pros/Cons and My Thought

The Craftsman CMCD701C2 is a 12-inch cordless miter saw that is powered by a 18-volt lithium-ion battery. It has a maximum cutting capacity of 12 inches at 90 degrees and 7-1/4 inches at 45 degrees. The saw also features a laser guide, a dust collection port, and an adjustable fence.

Pros:

• Powerful 18-volt motor
• Long battery life
• Laser guide for accurate cuts
• Dust collection port
• Adjustable fence
• Lightweight and portable

Cons:

• No included battery or charger
• Can be a bit bulky for some users
• Laser guide can be a bit finicky

User Reviews:

• Positive: "This saw is great! It's powerful, accurate, and easy to use. The laser guide is a lifesaver, and the dust collection port is a nice touch. I highly recommend this saw to anyone looking for a cordless miter saw." - Amazon reviewer
• Negative: "I was disappointed with this saw. The battery life is not as long as I expected, and the laser guide is not very accurate. I also found the saw to be a bit bulky for my needs." - Walmart reviewer

My Thoughts:

Overall, the Craftsman CMCD701C2 is a good cordless miter saw. It is powerful, accurate, and easy to use. However, it is a bit bulky and the battery life is not as long as some users might like. I would recommend this saw to anyone who is looking for a powerful and accurate cordless miter saw, but who does not need the lightest or most compact saw on the market.

Here are some additional thoughts on the Craftsman CMCD701C2:

• The laser guide is a nice feature, but it can be a bit finicky. It is not always as accurate as I would like, and it can be difficult to see in bright sunlight.
• The dust collection port is a good addition. It helps to keep the work area clean, which is important when making miter cuts.
• The adjustable fence is a useful feature. It allows you to make precise cuts, even if the workpiece is not perfectly square.
• The saw is a bit bulky, but it is still relatively lightweight. It is easy to carry and maneuver, even for extended periods of time.
• The battery life is not as long as some users might like. However, the saw comes with two batteries, so you can always have one charged and ready to go.

Overall, I think the Craftsman CMCD701C2 is a good cordless miter saw. It is powerful, accurate, and easy to use. It is not the lightest or most compact saw on the market, but it is a good value for the price.

Craftsman CMCD701C2 Where To Buy

You can buy the Craftsman CMCD701C2 and spare parts from the following retailers:

• Craftsman Direct: This is the official website of Craftsman, so you can be sure that you are getting genuine parts. They have a wide selection of parts available, including the CMCD701C2.
• Walmart: Walmart is a great place to find affordable tools and parts. They often have sales on Craftsman products, so you can save money.
• Amazon: Amazon is another great option for finding Craftsman parts. They have a wide selection of parts available, and you can often find them for a lower price than at other retailers.
• Best Buy: Best Buy is a good option if you are looking for a brick-and-mortar store where you can buy Craftsman parts. They have a limited selection of parts available, but they are usually in stock.
• Lowes: Lowes is another good option for finding Craftsman parts in a brick-and-mortar store. They have a wider selection of parts available than Best Buy, but they may not be in stock as often.
• eBay: eBay is a good option if you are looking for a used Craftsman CMCD701C2 or spare parts. You can often find them for a lower price than new parts.

I hope this helps!

Craftsman CMCD701C2 Problems and Solutions

some common issues and problems with the Craftsman CMCD701C2 and their solutions:

Problem: The saw does not start.

Solution: Check the power cord to make sure it is plugged in properly. If the power cord is plugged in properly, check the circuit breaker to make sure it is not tripped. If the circuit breaker is not tripped, check the fuse to make sure it is not blown. If the fuse is not blown, the saw may need to be serviced.

Problem: The saw blade is not spinning.

Solution: Check the switch to make sure it is turned on. If the switch is turned on, check the belt to make sure it is not loose or damaged. If the belt is not loose or damaged, the saw may need to be serviced.

Problem: The saw blade is not cutting smoothly.

Solution: Check the blade to make sure it is sharp. If the blade is sharp, check the alignment of the blade. If the blade is aligned properly, the saw may need to be serviced.

Problem: The saw is making a strange noise.

Solution: Stop using the saw immediately and check for any loose or damaged parts. If you cannot find any loose or damaged parts, the saw may need to be serviced.

Here are some additional tips for troubleshooting common problems with the Craftsman CMCD701C2:

• Make sure that the saw is properly assembled.
• Use the correct type of saw blade for the material you are cutting.
• Keep the saw clean and free of debris.
• Lubricate the saw as instructed in the owner's manual.

If you are still having problems with your Craftsman CMCD701C2, you may need to contact a qualified technician for assistance.

Craftsman CMCD701C2 Manual

Safety Information

• Read and understand all instructions before using this tool.
• Keep this tool out of the reach of children.
• Do not use this tool if it is damaged.
• Wear safety glasses and gloves when using this tool.
• Use the correct drill bit for the material you are drilling.
• Do not overload the tool.
• Do not use this tool in wet or damp locations.
• Disconnect the battery pack from the tool before making any adjustments or cleaning.
• Store the tool in a cool, dry place.

Before Use

• Make sure the battery pack is properly inserted into the tool.
• Select the correct speed setting for the material you are drilling.
• If you are using a drill bit that is larger than 1/4 inch, use a pilot hole to prevent the bit from wandering.
• If you are drilling in metal, apply pressure to the drill bit to prevent it from slipping.

Troubleshooting

• If the tool is not working, check the battery pack to make sure it is properly charged.
• If the tool is still not working, contact Craftsman customer service for assistance.

Maintenance

• Keep the tool clean and free of debris.
• Inspect the tool regularly for signs of wear or damage.
• Replace worn or damaged parts as needed.

Warranty

This tool is covered by a three-year limited warranty. If the tool fails due to a defect in materials or workmanship within three years of purchase, Craftsman will repair or replace the tool free of charge.

Contact Information

Craftsman Customer Service 1-800-445-6937 www.craftsman.com

Additional Information

• The tool can be used with a variety of drill bits, including wood bits, masonry bits, and metal bits.
• The tool has a two-speed gearbox that allows you to select the correct speed for the material you are drilling.
• The tool has an LED light that helps to illuminate the work area.
• The tool comes with two batteries and a charger.

I hope this manual has been helpful. Please let me know if you have any other questions.